Yealink VC880 - Using the CPW90-BT Bluetooth Wireless Microphones with VCS; Registering CPW90-BT with VCS; Deregistering CPW90 from VCS

| Accessories with Your System | 217
Using the CPW90-BT Bluetooth Wireless Microphones with VCS
CPW90-BT Bluetooth wireless microphones can work as the audio input devices of your video conferencing
system. You can connect up to 2 CPW90-BT Bluetooth wireless microphones to the video conferencing
system. For more information, refer to CPW90-BT Bluetooth Wireless Microphones Quick Start Guide.
CPW90-BT Bluetooth Wireless Microphones is not applicable to VP59.
• Registering CPW90-BT with VCS
• Deregistering CPW90 from VCS
• Viewing the Information of Bluetooth Wireless Microphones
• Finding the Registered CPW90-BT
Registering CPW90-BT with VCS
If you purchase video conferencing system and Bluetooth wireless microphones together, they are
already paired. Just turn the Bluetooth wireless microphones on to use them. If the model of your video
conferencing system is VC500/VC800/VC880/PVT980/PVT950, make sure a BT42 Bluetooth USB Dongle
is connected before you use the Bluetooth wireless microphones. If you purchase Bluetooth wireless
microphones separately, you need to pair them with video conferencing system manually.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Wireless Microphone > Search Mic.
• On your VCS, go to More > Setting > Video & Audio > Wireless Microphone > Add Wireless
Microphone.
• On your CTP20, tap Setting > Audio > Wireless Microphone > Add Wireless Microphone.
2. Place the Bluetooth wireless microphones on the charger and long press the mute button for 5 seconds
until the mute LED indicator fast flashes yellow.
The Bluetooth wireless microphones are paired with the video conferencing system.
Note: Up to 2 Bluetooth wireless microphones can be connected to one video conferencing
system.
Deregistering CPW90 from VCS
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Wireless Microphone > Deregistration.
• On your VCS, go to More > Setting > Video & Audio > Wireless Microphone.
Select a wireless microphone and then select Unbind.
• On your CTP20, tap Setting > Audio > Wireless Microphone.
Select a wireless microphone and then select Unbind.
It prompts whether or not you are sure to unbind.
2. Click OK.