Yealink VC880 - Selecting Video Frame Rate and Resolution; Configuring the Monitor Resolution

| Configuring Video Settings | 147
Selecting Video Frame Rate and Resolution
To transfer a clear and smooth video, you can specify the maximum frame and resolution for local video
according to the network environment.
Procedure
1. On your web user interface, go to Setting > Video & Audio > Main.
2. Configure and save the following settings:
Parameter Description Configuration Method
Enable 60fps
Enable or disable 60fps for a
video call.
Note: the default value is On. It
is not applicable VC200/VP59.
Web user interface
Frame
Configure the maximum frame
rate of the video.
• 5fps
• 15fps
• 30fps
• 60fps—this option appears
only when you enable 60fps.
Default: 30fps.
Web user interface
Resolution
Configure the maximum
resolution of the video.
• 1080P
• 720P
Default: 1080P.
Web user interface
Note:
If both parties do not use H.265 codec, and choose to use WDR exposure mode and 60fps, the
call will switch to auto exposure mode automatically. For more information, refer to Adjusting
the Exposure .
Configuring the Monitor Resolution
You can specify the resolution for the monitor.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Video & Audio > Output Resolution.
• On your CP960 conference phone, go to Setting > Display > Resolution .