| Configuring Account Settings | 98
Parameter Description Configuration Method
Username
Specify the username for this
EasyMeet account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Password
Specify the password for this
EasyMeet account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Server Host/Server
The IP address or the domain
name of the EasyMeet server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Outbound Proxy Server/
Outbound Server
The IP address or domain name
of the outbound proxy server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Remember password
Enable or disable the system to
remember the password.
Note: the default value is On.
If it is set to On, the password
will be filled in automatically
when you enter the username
next time.
Endpoint
CTP20
Transport
Specify the transport protocol
for transmitting the SIP
signaling.
The supported protocols are as
follows:
• UDP—it provides the best
transmission for SIP signaling.
• TCP—it provides a reliable
transmission for SIP signaling.
• TLS—it provides a safe
transmission for SIP signaling.
TLS is available only when the
device is registered on a SIP
server that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find the
service type and the port if
no server port is given.
Default: TLS.
Web user interface
To Next Page
Loading...
