| Configuring Camera Settings | 164
2. Configure and save the following settings:
Parameter Description Configuration Method
Display Mode
Configure the display mode of
the camera.
• High Definition
• Standard
• Mild
• Custom
Default: Standard.
Web user interface
Endpoint
CTP20
Saturation
Configure the image saturation
of the camera.
The saturation means the
maximum intensity of color in
the image.
Note: the value is from 0 to 100.
The default value is 50.
Web user interface
Endpoint
CTP20
Sharpness
Configure the image sharpness
of the camera.
The sharpness is an indicator
that reflects the definition of the
image plane and the sharpness
of image edge. Increasing
the sharpness will improve
the definition of the image.
However, if the sharpness is set
too high, the image will look
distorted and glaring.
Note: the value is from 0 to 100.
The default value is 15.
Web user interface
Endpoint
CTP20
Brightness
Configure the image brightness
of the camera.
Note: the value is from 0 to 100.
The default value is 50.
Web user interface
Endpoint
CTP20
Contrast
Configure the image contrast of
the camera.
Valid value: 0 - 100. The default
value is 49.
Web user interface
Endpoint
CTP20
To Next Page
Loading...
