| Getting Started | 18
Front Panel of VC200 Codec
The LED indicator in front of the camera indicates different camera statuses.
Related information
LED Instructions of VC880/VC800/VC500/VC200/PVT980/PVT950
Rear Panel of VC200 Codec
Port Name Description
① USB
• Connect to a USB flash drive for storing screen shots, the
recorded videos and captured packets. If multiple USB flash
drives are connected, only the last one can be identified.
• Insert a PSTN box CPN10 for connecting to the PSTN (Public
Switched Telephone Network).
② VC Hub/Phone
• For wired content sharing, connect this port to the Codec port
on the VCH50 video conferencing hub.
• If you need an audio device, connect this port to the Internet
port on the CP960 Conference phone.
• Connect to VCM34.
③ Display Connect to a monitor for video images output.
④ Security Slot Allow you to connect a universal security cable to the codec, so you
can lock the codec down. The system cannot be removed when
locked.
⑤ Line Out Connect to an audio output device via an audio cable (3.5mm).
⑥ Internet
Connect to the PoE via the network cable.
To Next Page
Loading...
