| Configuring Account Settings | 90
2. Configure and save the following settings:
Parameter Description Configuration Method
Cloud Account
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into YMS.
Web user interface
Endpoint
CTP20
Platform Type Select YMS.
Web user interface
Endpoint
CTP20
ID
Specify the ID when registering
this YMS account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Password
Specify the password when
registering this YMS account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Server Host/Server
The IP address or the domain
name of Yealink meeting server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Port
Select a port of Yealink meeting
server.
Note: the default port number is
0.
Web user interface
Outbound Proxy Server/
Outbound Server
The IP address or domain name
of the outbound proxy server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20
Remember password
Enable or disable the system to
remember the password.
Note: the default value is Off.
If it is set to On, the password
will be filled in automatically
when you log in next time.
Endpoint
CTP20
Note:
A YMS account can be logged into 5 devices at most simultaneously.
If the enterprise administrator enables the Device upgrade feature on Yealink Meeting
Server, video conferencing systems with YMS accounts logged into will upgrade the firmware
automatically once they receive the new firmware from Yealink Meeting Server.
To Next Page
Loading...
