YOKOGAWA UP55A User Manual

18-37
IM 05P02C41-01EN
Parameters
18
DisplayFunctionSettingMenu(Menu:DISP)
Parameter
symbol
Name
Display
level
Settingrange Initialvalue
PCMD
Active color PV
display switch
EASY
0: Fixed in white
1: Fixed in red
2: Link to alarm 1 (Alarm OFF:
white, Alarm ON: red)
3: Link to alarm 1 (Alarm OFF: red,
Alarm ON: white)
4: Link to alarm 1 or 2 (Alarm OFF:
white, Alarm ON: red)
5: Link to alarm 1 or 2 (Alarm OFF:
red, Alarm ON: white)
6: PV limit (Within range: white,
Out of range: red)
7: PV limit (Within range: red, Out
of range: white)
8: SP deviation (Within deviation:
white, Out of deviation: red)
9: SP deviation (Within deviation:
red, Out of deviation: white)
10: Link to DI (ON: red, OFF:
white)
0
PCH
PV color change
high limit
EASY
Set a display value when in PV
limit or SP deviation.
-19999 to 30000 (Set a value
within the input range.)
Decimal point position depends on
the input type.
0
PCL
PV color change
low limit
EASY 0
PTSL
Program display
pattern selection
STD
PTN: Pattern display
SK.RP: Ramp and soak display
PTN
BAR1
Upper bar-graph
display registration
STD
0: Disable
1:OUT, Heating-side OUT, Internal
value in Position proportional
control
2: Cooling-side OUT
3: PV
4: SP
5: Deviation
6: Loop-2 OUT, Loop-2 heating-
side OUT
7: Loop-2 cooling-side OUT
8: Loop-2 PV
9: Loop-2 SP
10: Loop-2 deviation
11 to 16: Disable
17: Feedback input (valve opening)
18: PV terminals analog input
19: RSP terminals analog input
20: AIN2 terminals analog input
21: AIN4 terminals analog input
22: Segment progress
23: Time event and alarm status
24: TSP
25: TSP deviation
23
BAR2
Lower bar-graph
display registration
STD 0
In Cascade control, the following parameters are also displayed for secondary loop. (the LP2 lamp
is lit)
• Parameter: PCMD, PCH, PCL
18.2ListofParameters

YOKOGAWA UP55A Specifications

General

Brand	YOKOGAWA
Model	UP55A
Category	Controller
Language	English