Routing elements
145
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Cyclic call distribution
Call distribution is the same as in the linear variant except that each new call is first
signalled in each case to the next member in the row.
Fig. 62 Cyclic call distribution
Delayed Calls to Subgroups
The members of the member group element can also be subdivided into a main
group and a subgroup (UG subgroup as of member setting).
The subgroup is called according to the set call distribution:
• If call distribution is set on global, the subgroup rings once the configured delay
time has elapsed.
• If call distribution is set on linear or cyclic, the subgroup rings once the config-
ured forwarding time has elapsed after the call has been ringing at the last
member of the main group.
The members of the subgroup are always called according to the global call distri-
bution.
In Summary
In a user group there are two selectable times that can be used for controlling call
distribution. Both are preconfigured in the system configuration:
• The delay time affects
– The user group elements. It can be activated and deactivated for each ele-
ment.
– The subgroup of members of the member group set on global.
• The forwarding time for linear and cyclic call distribution among the members
of the member group.
To Next Page
Loading...
Need help?
General
