Features
512
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 7. 5 LCR Function
If the LCR function is activated, dialled call numbers are analysed and converted.
This means that the communication server may actually dial a different call number
than the one entered by the user (see "LCR function", page 224).
Users can be authorized through the user configuration to dial using network pro-
viders of their own choice, contrary to the set LCR criteria (see "Bypassing LCR man-
ually (Forced Routing)", page 236).
If a network provider cannot be reached and the communication server detects
this, it will automatically try and reach an alternative network provider (provided
that function is activated). If a network provider cannot be reached and the com-
munication server does not detect this, the user has the possibility of dialling the
alternative provider manually using *90 (see "Alternative Routing (Fallback Rout-
ing)", page 232).
9. 7. 6 Emergency numbers
The system is equipped with emergency numbers, which can be used by all inter-
nal users. Emergency calls are routed to a destination B preconfigured in the sys-
tem configuration.
Detailed Description
Tab. 323 Emergency number
A total of 10 emergency numbers can be created in the numbering plan. The emer-
gency numbers are used to quickly dial an emergency number destination.
A total of 50 emergency number destinations with three destination numbers each
can be configured. A separate emergency number destination can also be assigned
to each terminal. This destination takes priority over the destination assigned in the
system configuration.
A destination number can be stored for each of the three switch positions of switch
groups 1 to 20. When an emergency number is dialled, one of the three destination
numbers is dialled.
Interface Scope
B Possible interfaces:
internal, external, PISN
To Next Page
Loading...
Need help?
General
