Features
527
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Aastra Intelligent Net:
In an AIN the configured destinations must not be on the same node as
the connected door intercom.
Reference to Other Features
9. 7. 13. 2 Open door
This function actuates the door opener of any door.
If the TFE is connected via an options card a relay which opens the door is activated
for three seconds.
If the door intercom system is connected via an analogue terminal port the corre-
sponding analogue port is called. When the call is answered by the TFE the config-
ured DTMF characters are transmitted automatically to open the door.
Detailed Description
Tab. 345 Open door
Functions / system configuration for connection via options card
Tab. 346 Opening doors: Function
Tab. 347 Opening doors: System configuration
Features:
• "Open door", page 527
• "Dial door intercom", page 528
Interface
Operating sequence / signalling on the ter-
minal
Scope
A Once the feature has been activated, the user
obtains the acknowledgement tone.
Requirement:
Authorization is enabled in the user configu-
ration.
Function Function code
Open door *74 <Call number of the door intercom>
Parameter Parameter value Scope / remarks
Open door Yes Necessary authorisation of the user who wants to
carry out the function.
Door intercom system <Call number> The number is defined in the numbering plan.
To Next Page
Loading...
Need help?
General
