Features
498
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 7. 1. 1 Answer general bell
A call can be signalled on the general bell (ringing signal) and be answered by any
user B who hears it.
Fig. 231 Answer ringing signal on general bell
Detailed Description
General bell is activated via user group (UG) or via proxy.
If other calls are routed to the general bell, they are placed in a queue (max. 10 en-
tries).
Tip:
General bell in the UG of the operator console with delay:
If the attendant is absent for a short time (or is overloaded), the general
bell is activated after the delay time. Employees who hear the ringing
tone can then answer the call.
Function in prefix dialling
Tab. 309 Answer general call: Function
System configuration
Tab. 310 Answer general call: System configuration
Function Function code
Answer ringing signal on general bell *83
Parameter Parameter value Remarks
General Bell Yes User group
General Bell Yes Substitution
To Next Page
Loading...
Need help?
General
