Numbering plan
50
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
3. 2 The System's Numbering Plan
The system's internal numbering plan is the numbering plan used for a stand-alone
communication server or a PINX in a private network. The numbers entered in the
numbering plan are used both to dial up call destinations in the communication
server and to execute control functions.. Call destinations and functions are
grouped into categories.
The internal numbering plan:
• Assigns number ranges to the categories.
• Allocates their numbers to call destinations and control functions, making them
obtainable and executable respectively.
As far as the call destination numbers are concerned, the system's numbering plan
is a PNP-type numbering plan.
To Next Page
Loading...
