Features
390
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 4. 9 DECT Follow Me
The system is such that a DECT call cannot be handed over from one system to an-
other (Handover). However, with the new DECT Follow Me feature the reachability
of DECT users in a PISN has been improved. This allows a DECT user to be reached
without delay in 4 PINXs (DECT Follow me must not be confused with the feature
"Follow me", page 377).
Fig. 190 Automatic activation of DECT Follow me
9. 4. 9. 1 DECT Follow Me in a Network with 2, 3 or 4 Systems
This configuration can be used to find a cordless phone in up to 4 systems without
delay. The phone has to be logged on in all 4 systems and the system search mode
be configured to Automatic on the phone.
Detailed Description:
The cordless phone is logged on under System A on its own communication server
and under B, C and D on the other PINXs. On each communication server a number
is configured under the corresponding DECT user (Follow Me Number) which is di-
alled automatically as soon as the phone registers with the system. On a PINX this
activates call forwarding from its own communication server to the communica-
tion server on which the cordless phone has just registered. If the phone then regis-
ters on its own communication server, the previously activated call forwarding is
deactivated.
Other properties:
• Twin Mode is possible on one’s own communication server
To Next Page
Loading...
Need help?
General
