Features
480
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
System Configuration requirements:
• For this feature to be used, the default PIN must be changed first (see "Locking /
unlocking terminals (telephone lock)", page 474 for the syntax).
• A private exchange access must not be defined or the private exchange access
prefix must be barred for all users using internal digit barring.
Note:
#46 temporarily bypasses any exchange access barring and the exter-
nal digit barring of the user identified by means of his user number
and PIN.
Reference to Other Features
9. 6. 22 Appointment reminder call
Each user can configure one individual appointment reminder call and one perma-
nent appointment reminder call, which are then stored in the system.
Fig. 224 Appointment call
Detailed Description
Tab. 287 Appointment call
Individual call orders are executed only once over the next 24 hours.
The appointment reminder call is not forwarded if CFU, CFNR or Do not disturb is
activated.
Features:
• "Making calls with your own settings on a third-party phone", page 477
• "Unlocking the terminal for each call", page 475
Interface Operating sequence / signalling on the terminal
A • Once the function has been executed, A obtains the acknowledge-
ment tone.
• If the wake-up time is reached, the terminal will ring for 1 minute.
To Next Page
Loading...
Need help?
General
