Features
484
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Function in prefix dialling
Tab. 294 Taking over an active connection: Function
Reference to Other Features
9. 6. 24 Take (taking a call)
The Take function allows users to take over a call connection of another user with-
out interrupting the connection or having the connection put through to them.
The example below illustrates how to accept a call connection from a user with a
cordless phone.
Fig. 227 Take (taking a call)
User A has set up a call connection with user B, who transfers the call to user C’s
cordless phone by pressing a key. Caller A is not aware that the call has been trans-
ferred.
Detailed Description
Tab. 295 Take (taking a call)
Function Function code
Take over call / data connection *88#
Features:
• "Take (taking a call)", page 484
• "Fast take (pick up a call or a call connection)", page 486
Interface Operating sequence / signalling on the terminal
C Activating via the configurable key on the cordless phone
To Next Page
Loading...
