Features
456
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 6. 13 Message function
A MESSAGE can be sent from any terminal to all system phones. Depending on the
terminal the receipt of a MESSAGE is signalled by a callback request.
Fig. 215 Activate MESSAGE
Detailed Description
Tab. 254 Activate MESSAGE
Number of callback requests:
The number of callback requests that can be stored depends on the system phone
type.
Display priority:
External alarm messages have maximum priority. Callback requests are displayed
with a higher priority than voice mail notifications and text messages.
Tip:
With the MESSAGE function a user has the possibility of activating several
callbacks simultaneously, depending on his system phone.
Interface
Operating sequence / signalling on the ter-
minal
Scope
A Once the callback function has been exe-
cuted, A obtains the acknowledgement tone.
Requirement:
The activating user A must be authorized to
use this function.
B • System phones with display: Text messages,
attention tone, LED display
• Office 10: LED display only
Possible interfaces:
Internal
Requirement:
System phone
To Next Page
Loading...
