Features
479
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 6. 21 Private calls with PIN
This feature is used to charge private phone calls automatically to private charge
counters, using the appropriate System Configuration. Users must always enter
their valid PIN beforehand. They can do so both on one of their own terminals and
on a third-party terminal on the same communication server or within a PISN.
Detailed Description
The user dials the function code #46, keys in his user number and enters his per-
sonal PIN. This deactivates his external digit barring; the terminal is also unlocked,
and the user obtains the exchange dial tone. He can then make an external call,
which is automatically charged to his private charge counter.
Note:
To prevent unauthorized persons from making private calls at other user’
expense, all private phone calls must be made with a PIN, even when
users are using their own terminals. The procedure is the same for both
locked and unlocked terminals.
Function in prefix dialling
Tab. 286 Private calls with PIN: Function
Other properties:
• During a call the function can also be made from an enquiry call.
• The called party sees the caller’s user number and not the number of the user
whose terminal is being used by the caller.
• For reasons of data protection no entry is made in the redial register.
• Unlike with #36 (making calls with your own settings but on a third-party
phone) you cannot hang up after activating the function and then prefix dial
within 60 seconds.
• The same PINs are used as for the phone lock.
• Users without their own terminals can be defined as virtual users, and can then
also use this feature.
Function Function code
Private call with PIN from one of one’s own termi-
nals or from a third-party terminal
#46 <User No
.> <PIN> <external call
number>
To Next Page
Loading...
