Aastra 400 Series System Manual

Features
404
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 5. 5 Three-party conference from an enquiry call
In an enquiry call (with A on hold), B can set up a three-party conference with C.
Fig. 195 Three-party conference
Detailed Description
Tab. 191 Three-party conference (conference from enquiry call)
Notes:
– From within an existing three-party conference, up to three confer-
ence participants can be connected by further enquiry calls.
– Conferences take up hardware resources.
Suffix dialling functions
Tab. 192 Three-party conference (conference from enquiry call): Functions
Interface
Operating sequence / signalling on the termi-
nal
Scope
A, C Depending on the system configuration the con-
ference participants will obtain
1)
:
•no tone at all
• the conference tone only once
• the conference tone regularly
1)
With three-party conference in the public exchange, the signalling depends on the network provider.
Possible interfaces:
internal, external
2)
, PISN
2)
If both users A and C are external users or virtual network PISN users, the settings authorising exchange-to-
exchange traffic will have to be observed (see "Exchange-to-Exchange Connections", page 241").
Functions System phones Analogue terminal
Set up three-party confer-
ence
•
• Use digit suffix dialling: 3
R 3 (R = control key)

Aastra 400 Series Specifications

General

Brand	Aastra
Model	400 Series
Category	Server
Language	English