Features
360
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 2. 6. 2 User-related features
Operation of the user-related features is subject to the definition of the PISN users
in one’s own numbering plan. The features can be divided into two groups:
Features That Set up a Call Connection
The following user-related features are supported by the communication server
and can be activated via the keypad, the function key or the Foxkey:
Tab. 148 QSIG features with call connection
Features That Can Be Activated/Deactivated
All remote-controlled user-related features listed in Tab. 356 are supported by the
communication server and can be activated or reset via the keypad or function key.
The only requirement is that the PISN user concerned is not protected against re-
mote control and that *06 is not barred in the internal digit barring for the user ex-
ecuting the feature.
Example: Clear
ing CFU for a PISN user: *0
6 <PISN user numbe
r> #21
System configuration
Due to the proprietary protocol, attempts at operating a user-related feature of an
older or third-party PINX via QSIG can lead to incorrect interpretations. That is why
the protocol extension can be inhibited in the trunk group configuration using the
parameter QSIG extension = No (initialisation setting = No).
Feature Activate
Call pick-up *86 PISN user number
To Next Page
Loading...
Need help?
General
