Features
386
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 4. 7 Do not disturb
To ensure that user B is no longer disturbed, all incoming calls are automatically di-
verted to an alternative destination C, which has to be specified using the system
configuration.
Fig. 188 Do not disturb
Detailed Description
Tab. 170 Do not disturb
C is the only user who can still reach user B.
The alternative destination C is valid for the entire system.
The Do not disturb destination cannot be forwarded to the exchange.
Functions in prefix dialling
Tab. 171 Do not disturb: Functions
Interface Operating sequence / signalling on the terminal Scope
B Once the feature has been activated, B obtains an
acknowledgement tone.
C Possible destinations:
• Users: internal, PISN
1)
• Operator console
Requirement:
C is not protected against calls (Do not dis-
turb, *26) or Call Forwarding Unconditional
(*02).
1)
The settings authorising exchange-to-exchange traffic need to be observed for PISN users in the public net-
work or on a virtually connected PINX (see "Exchange-to-Exchange Connections", page 241). (If the connec-
tion is not authorized, the call is not forwarded.)
Functions Function codes
Activate Do not disturb *26
Clear Do not disturb #26
To Next Page
Loading...
