Features
416
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 5. 9 Call acceptance
An internal user C can accept a connection with user A after being contacted in an
enquiry call by user B, who was connected with A.
Fig. 201 Call acceptance
Detailed Description
Tab. 208 Call acceptance
Suffix dialling function
Tab. 209 Call acceptance: Function
System configuration
Tab. 210 Call acceptance: System configuration
Reference to Other Features
Interface
Operating sequence / signalling on the termi-
nal
Scope
B • As soon as C has answered the call, B obtains
the busy tone
Possible interfaces:
Internal
C Possible terminals:
Analogue terminals
Function Analogue terminal
Call acceptance • with R1 (R = control key) or wait for more than 2 seconds after pressing the control
key
Parameter Parameter value Remarks
No settings
Features:
• "Hold (enquiry call)", page 399
To Next Page
Loading...
Need help?
General
