Call logging (CL)
310
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
8. 5. 1 Output types
The output type depends on who triggered the output. The output types are as fol-
lows:
Output type ICC output
• Output at user’s request, e.g. using a command on the operator console
• ICC counter readings and reports
Output type Service output
• Output at user’s request, e.g. using a command on the operator console
• System configuration data
•Event message list
Output type CL output
• Output triggered by the system (e. g. when call charges are incurred)
• OCL journal printouts (online)
• ICL journal printouts (online)
Output type Event output
• Output triggered by the system
• System events such as:
– Synchronization loss
– External message destination unobtainable
Number of output devices
Up to 4 printers or output devices can be connected to the system.
If only 1 output device is connected, it will carry out all the output jobs. In normal
operation it handles the CL printer job (ICL and OCL output). If the output is trig-
gered from somewhere else the output type is altered at short notice. If a CL output
job is followed by an Event output job, the new job will be separated by a line of as-
terisks *. If the printout of the new job is to begin on a new page, a manual printer
formfeed is to be performed beforehand.
To Next Page
Loading...
Need help?
General
