Features
496
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 7 Special features
Here describes features that are available only in combination with a special appli-
cation or supplementary equipment, e.g. announcement service or door bell.
9. 7. 1 Coded ringing on general bell
The installation of a general bell feature provides a paging system, albeit with a lim-
ited scope. Up to five internal users can be paged using a specific coded ringing on
the general bell. A user who recognizes his ringing pattern can answer the call from
any terminal B.
Fig. 230 Coded ringing on general bell
Detailed Description
Tab. 305 Search via coded ringing on general bell
Coded ringing consists of a long tone followed by n number of shorter tones (n =
1…0.5) and is set via the system configuration.
Coded ringing can be used as the destination for a Call Forwarding Unconditional.
Interface
Operating sequence / signalling on the ter-
minal
Scope
A • A obtains the ring-back tone
• A obtains the busy tone (the display reads
Unavailable) if the general bell is busy (queue
full).
Possible interfaces:
The function is activated locally on the sys-
tem.
B Possible interfaces:
Internal
To Next Page
Loading...
