Features
450
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Detailed Description
User B: Charge recall can only be activated from digital system phones with a dis-
play.
User A: At the end of the call, the user’s exchange access is automatically barred
again.
Under Charge recall in the AMS Account Manager a time can be configured for
both standard and phone booth connections by which a charge recall is delayed
when the handset goes on-hook. This means that more than one exchange call can
be made before the charge recall is effected. If the configured time is greater than
zero, the internal user automatically obtains the exchange-free signal when he
picks up the handset again and is able to dial a new number directly. If the user
does not pick up the handset within the time delay, a charge recall is effected.
Tip:
Store charge recall (*32 phone booth No.) under a function key.
Function in prefix dialling
Tab. 244 Charge recall: Function
System configuration
Tab. 245 Charge recall: System configuration
Reference to Other Features
9. 6. 10 Picking up a call
An incoming call from user A to user B can be fetched from any terminal C and then
answered.
Function Function code
Activate charge recall to standard connection *32 User No.
Parameter Parameter value Remarks
Charge recall: Standard 0 to 120 seconds
Charge recall: Phone booth 0 to 120 seconds
Features:
• "Setting up phone booths",
page 553
To Next Page
Loading...
Need help?
General
