Features
483
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Functions in prefix dialling
Tab. 291 Preparing to take over an active connection: Functions
System configuration
Tab. 292 Preparing to take over an active connection: System configuration
9. 6. 23. 2 Accepting the connection
A user C can take over an existing call or data connection A-B if D has prepared the
takeover.
Fig. 226 Taking over an active connection
Detailed Description
Tab. 293 Taking over an active connection
Functions Function codes
Preparations for taking over a call or a data connection from
user B to user C
*87 B*C# (call) or with *84 B*C# (data con-
nection)
Clearing the preparations for taking over a call or a data con-
nection from user B to user C
#87 C (call) or with #84C (data connection)
Parameter Parameter value Remarks
Prepare call acceptance Yes User configuration (user D)
Prepare data transfer Yes User configuration (user D)
Interface
Operating sequence / signalling on the
terminal
Scope
B User B obtains the busy tone once C has
taken the connection to A.
Possible interfaces:
Internal
Restriction:
Only simple connections can be accepted, not
conferences, users on hold, etc.
To Next Page
Loading...
Need help?
General
