Features
350
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Prefix and suffix dialling Function Codes
*/# function codes are used to control features. A function can be triggered under
three different sets of conditions:
• In prefix dialling: dialling takes place before any connection is made.
• In suffix dialling: dialling takes place during a connection or call.
• During the ringing phase: dialling takes place during the ringing phase of an in-
coming call
Depending on the nature of the feature a function is triggered either in prefix dial-
ling, in suffix dialling, during the ringing phase or in several call states.
On system phones, user-related features are activated or deactivated using the
Foxkey, under which a variety of functions can be stored. Equipment-specific set-
tings can be found in the relevant user's guide for the system phones concerned.
System configuration
Designation of the parameters concerned in the system configuration and their
settings.
Reference to Other Features
List of associated or linked features.
9. 1. 2 Information about the system phones
Unless otherwise specified, information on the system phonesOffice 45 also in-
cludes Office 45pro, Aastra 5360 also includes Aastra 5360ip, Aastra 5361 also in-
cludes Aastra 5361ip, Aastra 5370 also includes Aastra 5370ip, Aastra 5380 also in-
cludes Aastra 5380ip, Office 135 also includes Office 135pro, Aastra 1560 also in-
cludes Aastra 1560ip and Office 1560 also includes Office 1560IP. Finally, Office 160
stands for Office 160pro, Office 160ATEX and for Office 160Safeguard.
To Next Page
Loading...
Need help?
General
