Features
433
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Functions for listening to voice messages
Besides the possibility of listening to received voice messages either from the list of
unanswered calls, the voice-mail incoming list or by calling the voice mail system,
the following function codes are available:
Tab. 222 Voice mail: Functions for listening to voice messages
9. 6. 1. 11 Suffix dialling functions
A voice mailbox can also be operated from another internal telephone or an exter-
nal telephone (DTMF / Keypad protocol) using suffix dialling (DTMF) (Remote re-
trieval). The only requirement is that calls are forwarded to the voice mailbox and
that the relevant PIN is known and does not correspond to the default value "0000".
The Quick User's Guide below illustrates the sequence allowing a user to operate
his mailbox from a third-party internal or external phone. If required, the whole
page can be printed out and the Quick User's Guide can then be cut out. Once
folded or glued together it provides a practical guide in credit card format.
1)
"[ ]" the digits inside the brackets are optional
"nn" stands for the node number. If no node number is indicated, the node used is that of the terminal with
which the functions are carried out. With IP system phones this is always the Master; with cordless phones it
is the node at which the phone is currently located.
Functions Function codes
Listen to voice messages with audio guide *#94
Listen to voice messages without audio guide *#916 #
To Next Page
Loading...
Need help?
General
