Aastra 400 Series - Fast Take (Pick up a Call or a Call Connection)

Features
486
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
9. 6. 25 Fast take (pick up a call or a call connection)
The Fast take function combines and expands the two features Take a call and Pick
up a call:
Fast Take allows an internally authorised user C
• to take an existing call connection between the internal or external user A and
an internal user B.
• to pick up and therefore answer the incoming call from user A to user B.
• to take the outgoing call from user B to user A even before user A has answered
the call.
Fig. 228 Pick up a call connection or call with Fast Take
Detailed Description
Tab. 297 Fast Take
Function in prefix dialling
Tab. 298 Acceptance of a call or ringing connection: Function
Interface
Operating sequence / signal-
ling on the terminal
Scope
C *88 <User No. B> Requirement:
•The Fast Take authorization must be enabled
Valid for:
• Calls to internals users, UG, CDE
•Recall
• Announcement
• Simple connections with internal users or a user’s own voice
mailbox
Restrictions:
• Call to line key, appointment reminder call, recall
• Conference participants, users on hold, etc.
B User B obtains the busy tone
once C has taken the connection
to A.
Requirement:
• Fast Take protection not activated
Possible interfaces:
• Internal
Function Function code
Pick up a call connection or a call *88 <User No.>