Aastra 400 Series - Data-Service Connections and Destination Tables

Data service
276
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
7. 2 Data-service connections and destination tables
Data-service connections are routed via the call distribution element to a data-
service destination table. In the data-service destination table each data-service
type is allocated internal or PISN-internal destinations. There are several data-serv-
ice destination tables; their number depends on the system type.
The system analyses the data-service type involved and then routes the call to the
configured destination.
Destinations include:
• Internal users (including the remote maintenance access)
•User groups
•PISN users
• Data-service individual destination
If the data-service type cannot be unequivocally allocated, it will be routed to the
destination Unknown data service.
If no destination is found, the call is cleared down.
Tab. 93 Data-service destination table
Data-service type Interface of the destination terminal
Analogue modem • Analogue terminal interface
• Terminal Adapter on an BRI-S terminal interface
FAX 2, 3 • Analogue terminal interface
• SIP terminal interface
FAX 4 • Terminal interface BRI-S
• Analogue terminal interface
TA V.110 Terminal Adapter on an BRI-S terminal interface
TA V.120 Terminal Adapter on an BRI-S terminal interface
B channel transparent • Terminal interface BRI-S
• Remote maintenance access PPP
Telepac Terminal Adapter on an BRI-S terminal interface
Teletex Terminal Adapter on an BRI-S terminal interface
Telex Terminal Adapter on an BRI-S terminal interface
Videotex Terminal Adapter on an BRI-S terminal interface
Unknown Any destination