Aastra 400 Series - Call to the Private Leased-Line Network

Call routing
220
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
6. 5. 4 Call to the private Leased-Line Network
The call to a fixed network PISN user is routed via the private leased-line network.
The PISN user must be created in the internal numbering plan. The caller dials the
PISN user number.
The routing information on the PISN users is allocated to the user configuration
and includes the route to be used and the phone number under which the destina-
tion user can actually be reached.
Normally a PISN user in the fixed network can be reached directly under his PISN
phone number, which means that no other phone number needs to be entered in
the user configuration.
Fig. 93 Routing a call to the private leased-line network
Tab. 57 Setting the routing parameters
Parameter Parameter value
User configuration PISN-BN 330: (PISN user)
• Route 2 (route reference number)
• Number Not relevant in this case
Route 2:
• Trunk groups 2 (reference number of one or more trunk group(s))
• Digit barring No (do not poll digit barring)