Call routing
221
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
6. 5. 5 Call to a DSS1 Terminal equipment on the S Bus (DDO)
The BRI-S external interface can be used to address a terminal equipment that has its
own direct dialling plan. The system dials the terminal's end destinations using DDI
numbers, which is equivalent to a DDO (direct dialling out) function. An external
fax server is an example of one such terminal.
A PISN user is created in the communication server for each outgoing direct dial-
ling number.
Fig. 94 Call to a terminal with its own direct dialling plan
The following services are supported on BRI-S external :
•Base Call
•CLIP / CNIP
• Call charge information
• Numbering plan identifier NPI PNP
Trunk group 2
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
Parameter Parameter value
To Next Page
Loading...
