Features
391
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
• Not possible in virtual networks
• Possible only with Office 135 and Office 160
Notes:
–If the Follow Me Number cannot be dialled when the handset regis-
ters with a system, because the QSIG link is either interrupted or
overloaded, the phone will be unable to register. It will continue try-
ing until registration is successful.
– With Office 135 and Office 160 "Long-Click 1" switches over only
temporarily to manual search of the next system. What is relevant is
the setting in the phone's configuration menu. This prevents acci-
dentally switching the phone over from Automatic to Manual sys-
tem search and therefore unintentionally deactivating DECT Follow
Me.
The following configuration option can be used as an alternative to DECT Follow
me in a network with only 2 systems:
CFU if Unobtainable in a Network with 2 Systems
If most of the phone calls are made in the same system, a destination for unobtain-
able can be used for the user to find the cordless phone on the second system:
• The phone has the same internal number in both systems.
• With the first call the diversion takes approx. 13 seconds. The diversion is imme-
diate as of the second call.
• Twin Mode is possible on one’s own communication server
• Also possible in virtual networks
Application Notes:
Application Notes are available for both configuration options (see
https://pbxweb.aastra.com
Aastra Intelligent Net:
In an AIN the availability of the cordless phones across all the nodes is
guaranteed even without the "DECT Follow me" feature (network-wide
roaming). The phones are automatically registered whenever there is a
switch from the coverage range of one node to that of another, and
can then be called directly on the new node. Twin Mode/Twin Comfort
between the nodes is also supported. However DECT handover
between the nodes is not possible.