Call routing
245
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
System configuration
Tab. 77 Exchange-to-exchange connections: System configuration
Parameter Parameter value Remarks
Exchange settings:
• Exchange-to-Exchange
Connection
Not enabled / Digital-digital only /
Digital-analogue also / Analogue-ana-
logue also
Throughout the system
• Disconnect timeout <1...120 minutes> valid only for call type Analogue-Ana-
logue
• Wait for connection Yes / No For description see page 374
User settings:
• Exchange-to-Exchange
Connection
Not enabled / Digital-digital only /
Digital-analogue also / Analogue-ana-
logue also / According to exchange set-
tings
Priority over the setting for the sys-
tem as a whole
Abbreviated dialling set-
tings:
• Exchange-to-Exchange
Connection
Yes / General settings Priority over the exchange setting for
the system as a whole and the user-
specific setting
To Next Page
Loading...
