Call routing
268
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Configuration example
Fig. 119 Configuration example of overflow routing via the public network
In PINX 1’s numbering plan, the PISN users of PINX 2 are entered according to the
principle 60xxx.
The numbers of the internal users match with their direct dial numbers (user B has
internal number 300 and direct dial number 300).
Setting LCR to PINX 1:
• The digit sequence "60" is entered in the LCR table:
All outgoing, PISN-internal calls whose phone number begins with "60" will be
analysed by LCR.
• In the routing table the entry for the first network provider stays blank. However,
an alternative network provider is entered.
To Next Page
Loading...
Need help?
General
