Call routing
273
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Tab. 91 Settings for break-out routing at the source PINX
(PINX 1 in Geneva)
Parameter Parameter value
User configuration:
• Automatic CLIP No (permanently CLIP number entry is used)
• NPI E.164
• TON National
• CLIP number 022 827 9x xx
(x stands for the user’s DD number)
LCR table:
• ... ...
• 01 810 Zurich (allocate to the "Zurich" routing table)
• 01 811 Zurich (allocate to the "Zurich" routing table)
• 01 813 Zurich (allocate to the "Zurich" routing table)
• ... ...
"Zurich" routing table:
• Time zone x•Network provider: BreakOutZH
• Time: Allocate the times for "BreakOutZH"
Network operator table:
• Network provider "BreakOutZH" Route 5
• Conversion rule N (add dialled phone number)
Route 5:
• Name Zurich, ISDN exchange
• Trunk groups 2
• Digit barring No (do not consult digit barring)
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier NPI E.164
• Type of number TON Unknown
Trunk group 2:
• Name Zurich, PINX 2
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
• Automatic CLIP yes
To Next Page
Loading...
