Data service
278
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Routing to a data-service individual destination
If in the data-service destination table Individual destination is entered as the desti-
nation for a data service type, the call is routed to the destination entered under
Data service individual destination in the call distribution element.
Fig. 123 Incoming data-service routing from the public network with direct dialling to a data-service
individual destination
Tab. 95 Routing parameter settings
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
•Protocol DSS1
• Direct dialling plan 1
Direct dialling plan 1:
• Direct dialling number 10 1 (reference number of a call distribution element)
• Direct dialling number 20 2 (reference number of a call distribution element)
Call distribution element 1:
• Data-service destination table 2 (reference number of the data-service destination table)
• Data-service individual destination 210 (phone number of the data-service individual destination, in
this instance PC 210 )
Call distribution element 2:
• Data-service destination table 2 (reference number of the data-service destination table)
• Data-service individual destination 220 (phone number of the data-service individual destination, in
this instance PC 220 )
Data-service destination table 2:
• Data service type B channel transparent Data-service individual destination (of the call distribution ele-
ments)
To Next Page
Loading...
