Call logging (CL)
320
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Caller identification 1 and caller identification 2
These fields have a different meaning depending on the direction (incoming or
outgoing calls).
• Caller identification 1, incoming:
The number which the calling user wants to present to the called user is entered
here. This number is displayed as CLIP on system phones.
• Caller identification 2, incoming:
A call number from the calling user that has been verified by the network pro-
vider and found to be valid is entered here.
Fig. 150 Caller identification incoming
• Caller identification 1, outgoing:
On the OCL report at the gateway/transit PINX: The user call number valid within
the network is entered here.
On the OCL report at the source PINX no number is entered in this field.
• Caller identification 2, outgoing:
On the OCL report at the source/transit PINX: The user call number valid within
the PISN is entered here.
On the OCL report at the gateway PINX: The user’s DDI number is entered here.
On a stand-alone communication server the entries are output analogue to a
source PINX.
To Next Page
Loading...
