Aastra 400 Series System Manual

Features
401
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Detailed Description
Tab. 185 Enquiry call with return to initial call
Suffix dialling functions
Set up enquiry call: see "Hold (enquiry call)", page 399.
Tab. 186 Enquiry call with return to the initial call: Function
System configuration
Tab. 187 Enquiry call with return to the initial call: System configuration
Reference to Other Features
Interface
Operating sequence / signalling on the termi-
nal
Scope
A Music on hold is played to user A, who is on hold
1)
1)
With hold in the public exchange, the signalling depends on the network provider.
Possible interfaces:
internal, external, PISN
C Possible interfaces:
internal, external, PISN
Function System phones Analogue terminal
Return to the initial call with the disconnect key • with R1 (R = control key) or wait for more than 2
seconds after pressing the control key
• by putting the handset on-hook and then taking
it off-hook again after recall
Parameter Parameter value Remarks
Hold in the exchange Yes / No • In the group configuration.
• Local feature does not require a setting
Music on hold None / External audio source /
Internal audio source / Hold tone /
Welcome announcement
see also "Music on hold", page 395
Features:
• "Hold (enquiry call)", page 399
• "Brokering (switching back and forth between two calls)", page 402
• "Three-party conference from an enquiry call", page 404
• "Call transfer (switching)", page 409
• "Call waiting", page 438

Aastra 400 Series Specifications

General

Brand	Aastra
Model	400 Series
Category	Server
Language	English