Features
421
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Note:
Aastra 415/430 only: If the Voice mail mode is on Expanded (only G.729),
the Wave files have to be converted to the G.729 format prior to the
upload with the Aastra WAV Converter.
The wave files with the greetings must now be uploaded onto the communication
server’s file system:
1. From the AMS Shell select the communication server, enter the access data and
log in.
2. In the AMS shell under Tools - Manage audio data - Upload audio data - Upload
global greetings only, use the Add button to select one or both wave files.
3. Use Upload to upload the wave file(s) onto the file system.
The files are available to the application as soon as they are on the communication
server file system. We recommend that you use the corresponding function codes
to check the texts by listening to it (see Tab. 221).
Notes:
– Wave files with incorrect format cannot be played.
– Wave files that are longer than the time available as defined in AMS
under CM_7.2_File management cannot be loaded and will generate a
corresponding error message.
Tips:
– Before the announcements are used for the first time, the wave files
are automatically renamed (from name.wav to name.used.wav). This
allows new greetings to be uploaded onto the file system while greet-
ings are being made. Before an greetings is restarted a check is carried
out to see whether the file system contains a new file with the original
name (name.wav). If so, the old file is deleted, and the new file is
renamed and played back.
– To prevent existing files from being overwritten, they can first be
renamed in the communication server’s file system using AMS under
CM_7.2_File management.
To Next Page
Loading...
Need help?
General
