Features
506
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Activating / deactivating welcome announcements
The announcement service cannot be activated or deactivated globally; instead,
the individual welcome announcements are activated or deactivated. If several us-
ers share the same welcome announcements, they can only be deactivated individ-
ually in the call distribution elements. However this configuration can only be
changed by the installer via AMS.
Tab. 316 Announcement service: Activation functions
Note:
– For the function codes to be carried out, the user must be assigned an
authorization profile with the administration right Audio services. Also
the user PIN must not be set to the default value "0000".
– A PISN user can only operate the control functions of his own local
communication server using the */# function codes.
Aastra Intelligent Net:
– In an AIN, announcements can be recorded on both the master and
the satellites. The parameters for the welcome texts can also be config-
ured for each node. The announcement service used is always that of
the node through whose exchange interface the call is received.
– It is not possible to upload the announcements of a satellite via the
Master using AMS. However the files can be displayed, renamed and
deleted in the file system of the nodes via the Master.
– The number of welcome announcements and voice channels in an AIN
is determined by the Master: If an Aastra 470 is used as the Master,
each node also has 50 welcome announcements and 6 simultaneous
voice channels at its disposal, regardless of the type of communication
server used there.
– With IP system phones the Master’s announcement service is always
used; with cordless phones it is the node at which the phone is cur-
rently located.
Functions Function codes
1)
1)
"yy": = welcome announcement <01...20> for Aastra 415/430 or <01...50> for Aastra 470
[ ]": the digits within the brackets are optional
"nn" stands for the node number. If no node number is indicated, the node used is that of
the phone with which the functions are carried out. With IP system phones this is always
the Master; with cordless phones it is the node at which the phone is currently located.)
Activate welcome announcement *931 yy [*nn] #
Deactivate welcome announcement #931 yy [*nn] #
To Next Page
Loading...
Need help?
General
