Features
523
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
External switches:
The switch groups can also be activated via control inputs, e.g. via a preconfigured
time-switch clock.
External switches have a higher priority, i.e. they must be open (status 0) so that
switching via function key, function code or AMS can be carried out.
Function in prefix dialling
Tab. 338 Switching switch groups: Function
System configuration
Tab. 339 Switch groups: System configuration
Reference to Other Features
Function Function code
Switch switching group x in position y *85 xx y (xx = 01...20, y = 1..3)
Parameter Parameter value Remarks
Operate switch group Yes User configuration
Switching position Switch position of switch group 1 to 20 Function code and AMS configuration
are equivalent, i.e. the change last made
chronologically is the effective one.
Card control input Node number and slot number Several switch groups can be allocated
to one card.
Features:
• "Emergency numbers", page 512
• "Door bell", page 526
• "Announcement service", page 500
To Next Page
Loading...
