Numbering plan
55
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Name
The name is used:
• To dial by entering the name rather than the call number (dialling by name).
• To display the name on the user’s own system phone when the CLIP number of
an incoming call matches the number stored under the abbreviated dialling (see
"Replicating the Name Display in the Communication Server", page 81).
Digit Barrings and Exchange Access Rights
When an external destination is dialled via an abbreviated dialling number the
number stored bypasses the digit barring and the exchange access authorization.
When an external destination is dialled using dialling by name via abbreviated dial-
ling, only the exchange access rights are bypassed (more on digit barrings and ex-
change access rights see"Digit barring", page 207 and "Exchange access",
page 218).
To Next Page
Loading...
Need help?
General
