Features
559
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
the communication server via LAN. The communication settings between the
SMSC and the ESME can be configured in AMS:
Tab. 376 ESME settings
Besides these settings the authorization to send short messages to an ESME can be
enabled or disabled for each user:
Send SMS = Yes / No (default setting = Yes)
A web-based configuration is loaded into the browser via the AMS Shell for the
configuration of the ESME.
The use of the SMPP protocol to integrate an SMS server is subject to a licence.
Warning:
In the case of applications designed for emergency calls and personal
protection such as fire alarm systems, nurse light paging systems, alarm
systems against attacks or hold-ups, etc., text messages may only be used
to complement certified alarm systems. Text message alarming is only
compatible with emergency operation if the communication server and
the external alarm source are equipped with a UPS.
Parameter Remarks
IP address, Port IP address and port of the ESME for outgoing messages
Type The ESME type is specified here (SM application, SM gateway or SM Service
Centre).
Encryption This parameter must match the setting on the external message server.
URL of ESME configuration With the aid of this address a web-based configuration tool of an ESME can
be retrieved directly via the AMS Shell.
Default ESME Messages without a destination address are sent to the default ESME.
Password The password is checked every time a connection is set up between SMSC
and ESME (minimum length = 4).
Response time Max. amount of time the SMSC waits for an answer from the ESME [0...5
minutes]
To Next Page
Loading...
Need help?
General
