Identification elements
96
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Numbering Plan identifier, Type of Number, Number
These settings are used if the CLIP number could not be created automatically. This
is the case when there is no suitable DDI number available with a call to the public
network.
ECT information
If the parameter ECT information = Yes the new CLIP is also transmitted in the event
of a call transfer to the exchange, provided the network interface involved is in the
same trunk group.
Example:
Internal user A calls internal user B, who transfers to external user C. After the call
transfer, C is presented with A’s new CLIP instead of B’s old CLIP.
The same applies accordingly with COLP, if the caller is an external user.
Example:
External user A calls internal user B, who transfers to internal user C. After the call
transfer, A is presented with C’s new COLP instead of B’s old COLP.
Note:
With some carriers there are problems in connection with ECT informa-
tion. Transmission of this information can therefore be suppressed using
ECT information = No for each trunk group.
To Next Page
Loading...
