270 Chapter 8
Analysis and Processing of Result
Save and Recall the Agilent 4294A Internal Data
Save and Recall the Agilent 4294A Internal Data
The Agilent 4294A supports three types of data storage devices: floppy disks, volatile
memory disks, and nonvolatile memory disks (flash memory). This section describes how
to save data obtained through a series of measurement processes within the Agilent 4294A
into a storage device and how to recall data from the storage device.
For how to manage files (copy, delete, and so on), refer to “Managing Files” on page 305.
Agilent 4294A internal data flow
Figure 8-32 4294A internal data flow
Table 8-4 shows the types of internal data provided by the Agilent 4294A and the methods
used to save these data.
Table 8-4 Agilent 4294A internal data and saving methods
Agilent
4294A internal data
Saving method and saved contents
1
State save Data save Graphics save
Setting state Settings other than those for adapter
setup data
2
Ö
Calibration data User calibration data array Ö
on/off
Fixture compensation data array Ö
To Next Page
Loading...
Need help?
General
