448 Appendix D
Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
Initial Settings, Settings that can be Saved/Recalled, Settings
that can be Backed Up
The columns of Table D-1 show the following items.
• Initial settings (factory settings)
• Settings reset from the front panel or the GPIB by the PRES command
• Settings reset from the GPIB by the *RST command
• Settings that can be saved/recalled
Table D-1 uses the following symbols.
Ö: Settings that can be saved/recalled
blank: Settings that cannot be saved/recalled
• Settings that can be backed up
Table D-1 uses the following symbols.
Ö: Settings that can be backed up
blank: Settings that cannot be backed up
The symbol “¬” in Table D-1 indicates that the value is the same as that indicated to the
left.
To Next Page
Loading...
