Agilent Technologies 4294A - Recall the Saved File

292 Chapter 8
Analysis and Processing of Result
Save and Recall the Agilent 4294A Internal Data
device by the STORE DEV [ ] key.
To store the power as a default setting file on a floppy disk, store the file in the nonvolatile
memory (flash memory) once. Then copy it onto the floppy disk by using the file utility
menu displayed by
[Save] - FILE UTILITIES and key operations.
If the AUTOREC.STA file is present on both the floppy disk and the nonvolatile memory
disk when the power is turned on, only the AUTOREC.STA file of the floppy disk is read.
If you only store the AUTOREC.STA file on the nonvolatile memory disk, the file will not
be read when the power is turned on.
Recall the saved file
You can use the following steps to recall the data stored in the Agilent 4294A storage
device according to “Save the setting state, calibration data and memory array (State
Save)” on page 271 and “Save the calibration data and trace data (Data Save)” on page
273.
Step 1. Press the
[Recall] key. This reads the pre-selected contents of the storage device and
displays the Recall menu.
Step 2. Press the
STORE DEV [ ] key to display the Storage Device menu.
Step 3. Select the storage device that contains the file to be recalled.
NOTE When using the floppy disk drive, make sure the disk is first inserted in the drive.
The storage device selection using
[System] - IBASIC - more 1/3 - MASS STORE [ ] is
applicable when using the storage devices of the Agilent
4294A through the HP
Instrument BASIC function. It is different from the storage device selection using the
STORE DEV [ ] key. However, the storage devices themselves are the same.
Step 4. Press the
return key to return to the Recall menu. The selected storage device is displayed
in the
[] box of the key label of the STORE DEV [ ] key.
The first through fourth softkey labels in the Recall menu serve as the file names and the
directory name lists (first four items in alphabetical order when there are four or more files
or directories) read from the selected storage device.
Storage device Key operation
Floppy disk drive
FLOPPY
Volatile memory disk MEMORY
Non-volatile memory disk (flash memory) FLASH MEMORY
Softkey label Selected storage device
STORE DEV [FLOPPY] Floppy disk drive
STORE DEV [MEMORY] Volatile memory disk
STORE DEV [FLASH] Non-volatile memory disk (flash memory)