Agilent Technologies 4294A - Connecting the Supplied Keyboard

Chapter 1 25
Installation
Connecting the Keyboard
1. Installation
Connecting the Keyboard
1
Step 1. Insert the cable of the Mini-DIN keyboard into the keyboard connector on the rear panel.
Step 2. Set the keyboard in a comfortable position.
NOTE Do not put anything on the keyboard. Doing so can cause an error during the power-on
self-test.
Figure 1-5 Connecting the Supplied Keyboard
1. The Agilent 4294A comes with a keyboard if it is purchased with Option 810 (with keyboard).