Appendix B 403
Key Definitions
Softkeys displayed by pressing the [Utility] key
B. Key Definitions
Table B-73 Level monitor (Level Mon) menu
Key operation: [Utility] - LEVEL MON [ ]
Softkey Function GPIB command
OFF
|
Turns off the marker level monitor function. Usual markers are displayed. MKRMON OFF
AC-V
|
Displays the voltage value of the test signal at the marker position on the current
active trace (A or B) in the upper right area of the screen. Before selecting this
function, you must turn on the monitor display of the test signal level with the
OSC LEVEL on OFF key in Table B-13, “Display (Display) menu (1/2),” on
page 366.
MKRMON ACV
AC-I
|
Displays the current value of the test signal at the marker position on the current
active trace (A or B) in the upper right area of the screen. Before selecting this
function, you must turn on the monitor display of the test signal level with the
OSC LEVEL on OFF key in Table B-13, “Display (Display) menu (1/2),” on
page 366.
MKRMON ACI
DC-V
|
Displays the voltage value of the dc bias at the marker position on the current
active trace (A or B) in the upper right area of the screen. Before selecting this
function, you must select VOLT (dc bias voltage value monitor) in Table B-16,
“Bias Monitor (Bias Monitor) menu,” on page 367.
MKRMON DCV
DC-I Displays the current of the dc bias at the marker position on the current active
trace (A or B) in the upper right area of the screen. Before selecting this function,
you must select CURRENT (dc bias current value monitor) in Table B-16, “Bias
Monitor (Bias Monitor) menu,” on page 367.
MKRMON DCI
return Returns to Table B-71, “Utility (Utility) menu,” on page 402. (N/A)
To Next Page
Loading...
Need help?
General
