220 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
SCPI Compatibility
E4428C/38C Compatible Commands
[:SOURce]:RADio[1]:ARB:IQ:EXTernal:FILTer:AUTO
ON|OFF|1|0
✓ Commands are accepted by the signal
generator, but no action is taken. But the
following query is not supported and
generates an ERROR: –113, Undefined
header:
[:SOURce]:RADio[1]:ARB:IQ:EXTernal:FILT
er:AUTO?
[:SOURce]:RADio[1]:ARB:IQ:MODulation:ATTen
<value><unit>
[:SOURce]:RADio[1]:ARB:IQ:MODulation:ATTen?
✓
[:SOURce]:RADio[1]:ARB:IQ:MODulation:ATTen:AUT
O ON|OFF|1|0
[:SOURce]:RADio[1]:ARB:IQ:MODulation:ATTen:AUT
O?
✓
[:SOURce]:RADio[1]:ARB:IQ:MODulation:FILTer
2.1e6|40e6|THRough
✓ Commands are accepted by the signal
generator, but no action is taken. But the
following query is not supported and
generates an ERROR: –113, Undefined
header:
[:SOURce]:RADio[1]:ARB:IQ:MODulation:FI
LTer?
[:SOURce]:RADio[1]:ARB:IQ:MODulation:FILTer:AU
TO ON|OFF|1|0
✓ Commands are accepted by the signal
generator, but no action is taken. But the
following query is not supported and
generates an ERROR: –113, Undefined
header:
[:SOURce]:RADio[1]:ARB:IQ:MODulation:FI
LTer:AUTO?
[:SOURce]:RADio[1]:ARB:MARKer:CLEar
"filename",<mkr(1|2|3|4)>,<first_Point>,<last_
point>
✓
[:SOURce]:RADio[1]:ARB:MARKer:CLEar:ALL
"filename",<mkr(1|2|3|4)>
✓
[:SOURce]:RADio[1]:ARB:MARKer:ROTate
"filename",<rotate_count>
✓
Table 6-2 E4428C/38C Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
N51xxA
Remarks